66 not categorized PORSCHE PORSCHE EXHAUST SYSTEM PARTSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: CAYENNE 2003-06 (includes uncategorized and accessory items) RES987202TH1OK The heat reduction for exhaust systems with thermal insulation come first in motor sport. By reducing the heat buildup under the vehicle and in the engine compartment cooler air intake temperatures are reached which leads to a noticeable performance increase. Vehicles with increased power produce also higher exhaust temperatures. Exhaust systems with thermal insulation also protected adjacent components from these temperatures. Benefits for thermal insulation: - performance improvement - increasing the efficiency of the engine - cooler air intake - reduce the heat buildup under the vehicle - reduction of fuel consumption - faster response for catalysts (shorter heat cycle) - temperature resistance more than 110...(choose a part on the right to read more)
$1,183.60
Make a selection RES99625260SS This muffler replaced the complete exhaust system after the headers. Fits OEM headers. Also available with 200 cell cats for GT3 cup cars (res 996 252 60sc). No dme upgrade nessesery. Increase power up to 26kw (35ps) and 21nm all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$3,723.50
Make a selection RES99700060S Race exhaust system 997 GT3 cup (2010+ 3.8 l), stainless steel. - header diameter 50mm - tube diameter 70mm after the headers - recommended for engines 450hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
From $5,482.40
Make a selection RES99700060S401 Race exhaust system 997 GT3 4.0, stainless steel. - header diameter 55mm - tube diameter 90mm after the headers - recommended for engines 500hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$7,478.90
Make a selection RES99700060SGA3 Race exhaust system 997 GT3 cup (2010+ 3.8 l), stainless steel. - tube diameter 90mm after the headers all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$6,931.10
Make a selection RES99720080S Race system grand am spec. 997.2 3.6l & 3.8l facts: - headers - 3 x 45mm (1.77") diameter tubing into a 1 x 70mm (2.75") collector (reduces thermal stress) - muffler - interchangeable cat bypass tube w/ 4 tube style mufflers, tubing 70mm (2.75") - weighs 36 lbs. (16,4 kg) - developed for excellent mid range torque needed out of corners - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - made in Germany - intoxicating growl at idle, partial throttle and wide open throttle - 997 3.6l & 3.8l - grand-am regulation 106db - approved for use in the grand-am continental series - dme programming necessary includes: 4 x conical springs 2 x adjustable exhaust tips w/ clamps 1 x muffler bracket...(choose a part on the right to read more)
$5,470.30
Make a selection RES99701062S Race headers 997 GT3 cups, stainless steel - + 10 crank hp & + 8 crank torque - total weight is 14.1 lbs. (6,4 kg) FVD is proud to introduce our newest line of Brombacherrace exhaust systems. Brombacher race exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, this race system meet's the standards of the fia and is registered with them directly. In addition, Brombacherrace exhausts systems are available for ultimate performance full titaniu...(choose a part on the right to read more)
From $3,777.40
Make a selection RES99715100S This muffler replaced the complete exhaust system after the headers. Only 11kg also available with 200 cell cats. Dme upgrade nessesery. Increase power up to 26kw (35ps) and 21nm all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$2,820.40
Make a selection RESMK911001 This kit is necessary when installing any of our racing / street exhaust systems manufactured by m&m exhaust gmbh whose part number begins with res 911 or bes 911 kit contains: - modified oil lines - straps - header / heat exchanger gaskets
$378.81
Make a selection VRT95545T When it comes to turbo Porsche's, there is nothing else that can give you as much power and performance as the ecu flash. The Cayenne turbo is no different than the 911. It has so much uncracked potential that the ecu flash lets out making the first generation Cayenne turbo a thrill to drive. The 4.5l v8 engine is much more equipped once flashed. With stock 415hp at the crank, adjusting the trucks boost, fuel, and timing gives the Cayenne turbo another 45 horsepower to the crank. With a gain of almost 90ft/lbs of torque, towing your other toys is like they are not even there. Furthering the performance of the turbo truck is easily done with cat bypass pipes or a exhaust system. Because of the increased boost a...(choose a part on the right to read more) General FitmentCAYENNE 2003-06
$1,350.00
Make a selection RES99709064SRSR This is a custom system made for a 997.1 GT3 cup with a 4.0 l conversion that has 500 hp+ - header diameter 55mm - tube diameter 76mm after the headers - recommended for engines 500 hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$5,846.50
Make a selection BBI9912020003 The bbi autosport 997 & 991 GT3 / rs exhaust side bypass is a direct replacement for the factory primary side mufflers. The primary mufflers are weigh approximately 44 pounds total while the bbi pipes are 4 pounds in comparison. For durability and protection against corrosion, each system is meticulously tig welded using 304 aerospace grade stainless tubing with lower carbon content. The result is a substantial reduction in weight behind the rear axle which significantly improves handling and less restriction to produce a much more aggressive exhaust note.
$950.00
Make a selection FVD11196415GKT This installation kit is needed to install our part numbers FVD 111 964 15 or FVD 111 964 17. Sold as a set. 1 necessary per car.
$42.90
Make a selection CAPKLS00991RSFB Remote control kit for manually opening and closing the exhaust valves in addition to our programmable control unit, we also have a simplified version to offer. It fits to modell 991 GT3 rs und GT2 rs ( please name you model with the order ) . Most of the in-series control units open and close the exhaust valves according to a set program pattern. With our control unit, we are able to control the flaps to open permanently, without the in-series control being able to intervene. When the exhaust valve system is closed again with the use of the remote control unit, then the in-series control unit will again take over the control of the exhaust valves. We expressly point out that this parts comes without the approv...(choose a part on the right to read more)
$731.50
Make a selection BES98115000SSP Clubsport aggression and sound under high rpms with an abundance of gurgling and crackling off throttle. Yet this one is also very civilized at low rpms and while cruising. Excellent choice for a daily driver without the added expense of valves. + 11 hp & + 10 tq gain. - thermal insulation on piping to keep suspension components cool. Withstands up to 2,012 degrees fahrenheit (1,100 degrees celsius). - larger diameter tubing internally to compensate for the larger motor. - 2 x 3.5 (90 mm) round tips. - intoxicating growl at idle, partial throttle and wide open throttle. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - minimal resonance / drone in the cabin. - "aero quip" style mo...(choose a part on the right to read more)
$2,725.80
Make a selection BES987C5000SK - + 15 crank hp & + 14 crank torque. - 2 ½" (63.5 mm) diameter tubing (reduces thermal stress). - 22 lbs. (10 kg) weight savings. - replaces OEM valved Porsche sport exhaust (pse). - reuses OEM headers and cats (no cel, retains OEM software). - intoxicating growl at idle, partial throttle and wide open throttle with the valves open. Factory quiet with them closed! - no ecu software programming necessary. - includes dual 90mm tips - made in Germany. In our relentless quest to meet all of our customers exhaust needs; we wanted to create a special black edition system that retains the OEM headers and cats. The benefits are 3 fold, you can pass emissions with ease, you don't need to run a software file (for th...(choose a part on the right to read more)
$4,792.70
Make a selection RES99625260SSGB This system was created for the low db race tracks in great britain, hence the "gb". It will pass the strict requirements of tracks like donnington park, oulton park and castle combe. So obviously you will be able to run this system at silverston, rockingham. Our exhaust has a static (standing) measure of 98 db measured at ¾ max revs 50 cm from the tailpipe. The drive by (passing) measure is 102 db.* power gains are + 25 crank hp / + 19 crank torque. The system will bolt up to the factory GT3 headers and includes a 200 cell "x-torque"design which diminishes db's while increasing torque. The muffler is a lightweight free flowing design which includes a balance tube design to further decrease db's but al...(choose a part on the right to read more)
$4,787.20
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |